Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Moore, OK
We provide independent Trane air duct cleaning and related service across Moore, OK, for homeowners whose Trane systems feed forced-air ductwork through some of the hottest attics in the Oklahoma City metro. The one thing that makes our Trane work in Moore different: because much of the housing stock here was rebuilt after 1999 and again after 2013, we spend a lot of time inspecting attic ductwork and cased coils in newer homes where the builder’s original flex is still in place. We’re an independent shop, not affiliated with or authorized by Trane, and we work on Trane equipment every week. Call (855) 360-8688. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Moore Residents Choose Us for Trane Service
Duct cleaning is a small industry full of generalists. We’re not one. Our work runs on Rotobrush rotary-brush systems and Nikro HEPA-vacuum equipment, the same class of tools specified on remediation job sites, and we keep Abatement Technologies and Guardsman products in process where containment and filtration standards call for them. Trane is a brand we work around constantly: XR14 and XR15 split systems, XB13 and XB14 builder-grade condensing units, variable-speed air handlers, TEM and TAM-style cased coils, and plenty of older Weathertron-era equipment still living in 1970s and 1990s Moore ranches.
Being independent means we don’t sell a brand. We repair, clean and service what you already own. Scheduling in Moore is straightforward, and the price is set per job by the written estimate before anything starts. Our technicians have up to experience. If you want a specialist who reads ductwork for a living, that’s us. See more on our Trane service page, or call (855) 360-8688.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Trane Air Duct Cleaning Problems We Solve in Moore
These are the Trane-related issues we run into most often in Moore, tied to how homes and attics here actually behave:
- Builder-grade flex feeding a Trane system after a rebuild. Attic flex in post-2013 homes is often crushed at a roof-jack penetration or split at a mastic seam after a summer in a 130°F-plus attic, and the leak pulls hot air into the return.
- Fouled Trane cased coils in TEM and TAM-style air handlers. Drywall grit and flex-duct dust from a build-out settle on the coil face, and airflow drops through the first cooling season. Cleaning and sealing fixes what a coil replacement wouldn’t.
- Pulled-apart plenum seams on horizontal Trane attic air handlers. Mastic-sealed seams open as attic temperatures climb through July and August, letting return-side leaks pull attic air straight into the blower.
- Patched Weathertron-era trunks in 1970s-90s Moore ranches. Metal trunks patched with mismatched flex after storm repairs develop loose inner liners and collapsed sections that starve the coil.
- Hail-crushed flex feeding a Trane XR condensing system. The outdoor unit gets inspected after a storm; the crushed attic run feeding it doesn’t. The system runs against a leaking supply and never hits rated capacity.
Trane Service in Moore: What Local Conditions Mean for Your Equipment
Moore was scoured twice in a generation – the May 3, 1999 F5 and the May 20, 2013 EF5 – so a large share of the 73160 housing stock is post-2013 rebuild rather than original. Dubbing that “new construction” misses the point. Duct cleaning here is unusually often a first-occupancy or post-rebuild inspection job: verifying that the flex duct in a newer home is sealed and undamaged, or confirming that a rebuilt house’s system isn’t still carrying construction dust and drywall grit from the build-out. Few other Oklahoma City suburbs have this much ductwork that’s either brand-new or inserted into older, repeatedly-repaired systems. In the 1970s-90s brick-veneer ranches that survived, piecemeal storm repairs mean patched and mismatched duct sections. In the rebuild subdivisions, the flex is often still the builder’s original install – even after a re-roof.
The single most common Trane duct call here is a home with a brand-new roof but dusty, sagging attic flex. A typical Moore call is a post-2013 rebuild with a new roof and a Trane XR system that cools unevenly. Camera inspection often shows builder-grade flex crushed at a roof-jack penetration or a mastic seam split by summer attic heat, pulling hot attic air into the return. A qualified local pro reseals or replaces the damaged runs, re-tapes and mastics the plenum and cabinet seams, and cleans the cased coil and blower while the system’s open, since the same grit that entered through the leak has settled there.
Trane Models & Products We Service in Moore
We service Trane split-system air conditioners (XR14 and XR15) and XB13 and XB14 builder-grade condensing units paired with ductwork in Moore homes. We work on Trane variable-speed air handlers, TEM and TAM-style cased coils, and the older Weathertron-era furnaces and air handlers that still run in plenty of 1970s-90s Moore ranches. Parts selection follows the job. Flex and metal duct repairs use quality aftermarket duct board, R-8 flex and mastic. When a Trane-specific cabinet, plenum or coil component is called for, OEM or exact-match parts are sourced. We don’t stock or sell Trane parts, and we’re not a Trane dealer. We repair and service the equipment you own with parts that fit it.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Moore
Air duct cleaning for a typical Moore home is quoted per job by written estimate, not per vent. What drives the number: the size and layout of the duct run, how many flex sections need repair versus cleaning, whether the cased coil and blower come apart for a proper cleaning, and whether video inspection reveals crushed or collapsed runs that must be resealed first. A free estimate includes walking the system with you, checking accessible attic runs, and giving you a flat price agreed before any work starts. Dryer vent cleaning and air duct repair are quoted separately and can join the same visit. Call (855) 360-8688 for a free estimate and a straight answer on what your Moore home actually needs.
Serving Moore, OK – Our Local Coverage Area
We serve Moore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Moore
My Moore house was rebuilt after the 2013 tornado and still has the original attic flex – does it need cleaning or replacement? Often cleaning is enough if the flex is intact; if the inner liner is crushed or collapsed, replacement is the honest call. Video inspection tells you which, before any work starts. Call (855) 360-8688 for a free estimate.
Why does my Trane system in Moore run a long time and still feel humid? Long runtimes with lingering humidity usually mean return-side leaks pulling hot attic air into the blower, or a fouled cased coil blocking airflow. Both are common in Moore’s post-rebuild homes where mastic seams have opened in summer attic heat. Call (855) 360-8688 to get it inspected.
Can hail damage ductwork in the attic if the roof looks fine? Yes, and it happens often. Spring hail events crush or perforate attic flex and roof-jack connections even when the shingles look normal from the ground. If your Trane system stopped cooling evenly after a storm, the attic run is the first place we look. Call (855) 360-8688 for an inspection.
Do you use Trane parts on my XR system? We use quality aftermarket duct board, R-8 flex and mastic on flex and metal duct repairs, and source OEM or exact-match parts when a Trane-specific cabinet, plenum or coil component is required. We’re independent of Trane, not a dealer, and we don’t claim to be authorized.
What’s the giveaway that my Trane ductwork needs attention after a rebuild or re-roof? A brand-new roof with dusty, sagging attic flex is the classic sign in Moore. If the re-roof didn’t touch the ductwork and the flex still looks like the builder’s original install, it’s worth a look. Call (855) 360-8688 for a free estimate.
Service Areas Near Moore
We work on Trane duct systems across Moore and out into the surrounding metro, including Oklahoma City, Del City and Midwest City. If you’re nearby and want a specialist who knows this housing stock, get in touch.
Book Your Trane Service in Moore Today
Call (855) 360-8688 for a free estimate on Trane air duct cleaning in Moore. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Air duct cleaning, dryer vent cleaning and air duct repair, done by an independent specialist with professional-grade equipment. One flat price per system, agreed before work starts, plus before-and-after photos of your own ducts. Estimates are free.
Written by the team at Shoreline Duct Cleaning.